Admaterials is not only able to assist you with repair and building materials testing and specification compliance, but we also have extensive experience of assessing the quality of the product and give advise on how to improve it. To ensure and maintain high standard of building quality, materials used in construction projects shall meet regulations and standards. These materials are required to go through a rigorous screening and testing process to ensure that they meet performance standards and statutory requirements. Through implementing a quality control program, Housing & Development Board (HDB) screens and provides a comprehensive selection of quality products needed for HDB construction projects through HDB’s Materials List with a set of product evaluation requirement. Admaterials provides such testing services based on a set of product evaluation requirements complying with the required standards and technical specifications.

Building Materials 

• Tile Adhesive
• Tile Grout
• Prepared Floor Screed/Prepacked Waterproof Screed
• Prepacked Plaster/Prepacked Mortar
• Prepacked Skim Coat
• Acrylic Polymer Cementitious Coating
• Self-Leveling Screed
• Sealant

Repair Materials

• Non-Shrink Grout
• Polymer Modified Cement Mortar
• Bonding Agent
• Waterproofing
• Epoxy Mortar
• Epoxy Resin

Building & Repair Materials 

• Flow consistency
• Setting time
• Stiffening time
• Water retentivity
• Change in height
• Flexural strength
• Compressive strength
• Bond strength
• Water absorption
• Linear shrinkage
• Skid resistance
• Taber abrasion
• Tensile adhesion strength
• Expansion & bleeding

Ceramic Tiles Testing

• Dimensions
• Straightness of sides
• Rectangularity
• Surface flatness
• Surface quality
• Deep abrasion
• Modulus of rupture
• Water absorption
• Scratch hardness
• Slip resistance
• Reverse staining
• Stain resistance
• Chemical resistance
• Coefficient of friction
• Shear adhesion bond strength

Waterproofing Membrane Testing

• Tensile pull off strength
• Crack bridging
• Shore hardness
• Water penetration
• Water vapour transmission
• Accelerated weathering
• Dimensional stability
• Tensile shear at joint
• Puncture resistance
• Impact resistance
• Peel adhesion to concrete
• Resistance to hydrostatic head
• Resistance to leakage at joint
• Tensile strength & elongation at break